Step 3 Click the directional buttons to wheel the camera to the location of where you want to set the limit, and click Left Limit or Right Limit to link the location to the corresponding limit. Step 2 The PTZ control panel displays on the right of the interface. Step 1 Click (the joystick icon)on the quick settings toolbar of the PTZ camera’s Live View. Note This function is supported only by certain models. Linear Scan trigger a scan in the horizontal direction in the predefined range. How to set Linear Scan Limitsīefore You Start Make sure the connected IP camera supports the PTZ function and is properly connected. Step 6 (Optional) Click Stop to stop the pattern. 7 W with IR cut filter on, max.Step 4 Select a pattern in the text field. Wireless Range: 50m(depend on environment).Transmission Rate: 11b: 11Mbps, 11g: 54Mbps, 11n: up to 150Mbps.Security: 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK, WPS.
On-board storage: Built-in Micro SD/SDHC/SDXC slot, up to 128 GB.Alarm: 1x alarm I/O *only for –S models.Communication Interface: 1 RJ45 10M / 100M Ethernet interface.Audio: 1-ch 3.5 mm audio in (Mic in/Line in)/out interface (-S model).System Compatibility: ONVIF (Profile S, Profile G),ISAPI.General Function: One-key reset, Anti-Flicker, heartbeat, mirror, password protection, privacy mask, Watermark, IP address filtering.Protocols: TCP/IP, UDP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour.Alarm Trigger: Face Detection,Line Crossing, Intrusion Detection, Motion detection, Dynamic analysis, Tampering alarm, Network disconnect, IP address conflict, Storage exception.Network Storage: NAS (Support NFS,SMB/CIFS), ANR.Image Settings: Rotate Mode, Saturation, Brightness, Contrast, Sharpness adjustable by client software or web browser.Day& Night: IR cut filter with auto switch.Illumination: 0.01Lux F1.2, AGC ON, 0.028Lux F2.0, AGC ON, 0 Lux with IR Image Sensor: 1/3" Progressive Scan CMOS.
0 kommentar(er)
